ISO 6507-4:2005《金属材料 维氏硬度试验 第4部分:硬度值表》国际标准(英文版)_硬度标准_技术_沈阳天星试验仪器股份有限公司
ISO 6507-4:2005《金属材料 维氏硬度试验 第4部分:硬度值表》国际标准(英文版)

INTERNATIONAL STANDARD ISO 6507-4:2005(E)


6507-4.png

Metallic materials — Vickers hardness test —

Part 4:

Tables of hardness values



ISO 6507 consists of the following parts, under the general title Metallic materials —— Vickers hardness test:

ISO 6507-1 Metallic materials —— Vickers hardness test Part 1: Test method

ISO 6507-2 Metallic materials —— Vickers hardness test Part 2: Verification and calibration of testing machines and indenters

ISO 6507-3 Metallic materials —— Vickers hardness test Part 3: Calibration of refernce blocks

ISO 6507-4 Metallic materials —— Vickers hardness test Part 4: Table of hardness values


标准状态:已作废


替代情况: ISO 6507-4:2018替代


Contents


Foreword

1 Scope

2 Tables of Vickers hardness values for use in tests made on flat surfaces



1  Scope


This part of ISO 6507 gives tables of Vickers hardness for use in tests made on flat surfaces.



2  Tables of Vickers hardness values for use in tests made on flat surfaces


See Table 1 for range < HV 0,2.

See Table 2 for range HV 0,2 to HV 3.

See Table 3 for range HV 5 to HV 100.



相关标准


国家标准GB/T 4340.4-2009《金属材料 维氏硬度试验 第4部分:硬度值表》

       本标准为GB/T4340的第4部分。 

       本标准等同采用国际标准ISO6507-4:2005《金属材料 维氏硬度试验 第4部分:硬度值表》(英文版)。 

       本标准对国际标准ISO6507-4:2005在以下方面进行了编辑性修改: 

       —— 重新编写了前言,删除原ISO 前言; 

       —— 用中文惯用的小数点符号.代替英文采用的小数点符号,。 





在线阅读            免费下载
contentHeight = $(".newsContent").height(); if(contentHeight < 615){ contentHeight = 615; }